How to install the shower faucet? This may be an aspect that many people pay more attention to now. The shower faucet can help us improve the comfort of bathing and ensure that we save water. However, some people are not very clear about the installation method of the shower faucet and cannot guarantee the service life. What is the installation method of the shower faucet?
The shower faucet is the water valve of the water pipe, which is opened or closed by the rotary device to control the flow of cold and hot water. The shower faucet is the water valve of the water pipe, and the bathroom hardware for sale sanitary device that controls the flow of cold and hot water is opened or closed by the rotary device. Common sizes on the market are eight inches, four inches and so on.
Shower water tap can be classified according to installation methods: wall-mounted and wall-mounted shower faucets. Wall-mounted shower faucet: It is installed on the wall, and the faucet body, water divider, connecting pipe pillars, etc. all protrude from the wall. In-wall shower faucet: only the handle protrudes from the wall, and most of the pipes and water dividers connecting the faucet are buried in the wall, which is invisible in appearance.
In general, the bathroom faucet and shower sets are installed and used together, the faucet is 70 to 80 cm from the ground, the height of the shower column is 1.1 meters, the length of the joint between the faucet and the shower column is 10 to 20 cm, and the height of the shower from the ground is 2.1 to 2.2 meters, consumers should fully consider the size of the bathroom space when purchasing. The shower faucet can be mounted on the wall, or into the wall, with only the handle exposed, or bath tub faucet with hand held shower on the tub.
When installing and using the shower faucet, special attention should be paid to the fact that the cold and hot water supply pipes of the shower faucet should not be installed backwards. Under normal circumstances, facing the faucet, the left side is the hot water supply pipe, and the right side is the cold water supply pipe, except for special signs. After the installation is completed, remove the easily blocked accessories such as the bubbler and the shower, let the water flow out, completely remove the impurities, and then put it back. For competitive bathroom accessories sale from Likegro.The tools attached to the faucet should be kept for future maintenance. When disassembling the water inlet hose, do not wrap the sealing tape, do not use a wrench, just tighten it by hand, otherwise the hose will be damaged. The wall-mounted faucet should determine the exposed length of the elbow according to the needs, otherwise the elbow will be exposed too much from the wall, which will affect the appearance.
Shower faucets enhance bathing comfort and help us save water. However, in order to ensure the service life of the shower faucet, it must be installed in specifications, otherwise, it will need to be replaced back and forth due to installation problems, which will have a great impact on our use.