The automatic sensor faucet works according to the principle of infrared reflection. An infrared emitting tube is installed near the bottom of the faucet, and the projection area of the emitting tube is just below the water outlet of the faucet. When people put hand under the water outlet of the sensor kitchen tap, the infrared receiving tube will be covered, and the microcomputer inside the faucet will receive the signal and send the water boiling command to the solenoid valve to release the water. When the hand leaves the bottom of the sensor kitchen faucet, the solenoid valve will receive a signal to close the valve, and the faucet will stop releasing water. Under normal circumstances, the waterproof time of the touch sensor kitchen faucet will not exceed 30 seconds, and the water flow is also controlled by auto flow sensor tap, which can greatly save water energy.
Likegro's touch sensor kitchen taps are widely used in shopping malls, office buildings, rest stations and other areas with high quality, cost-effective prices, and perfect after-sales service, providing people with a lot of convenience.
Auto Sensor Kitchen Faucet
The automatic water faucet refers to the principle of infrared reflection. When the human hand is placed in the infrared region of the faucet, the infrared emitted by the infrared transmitting tube is reflected to the infrared receiving tube due to the blocking of the human hand, and the signal is sent through the microcomputer processing in the integrated circuit. For the pulse solenoid valve, the solenoid valve opens the valve core according to the specified command after receiving the signal to control the water from the faucet，when the human hand leaves the infrared sensing range, the solenoid valve does not receive the signal, and the solenoid valve core is reset by the internal spring. Control the water from the faucet.
Induction faucets use AC or DC power supply and use infrared induction. In the induction area, the water will come in, and the water will be stopped when you leave the induction area. The machine is controlled by a microcomputer, and the optimal induction distance is determined according to the shape of the basin. No manual adjustment is required. Alkaline dry batteries (6V, 3V, 4.5V) are used for DC power supply.